Gemco™ Semelex® II Safetimeter Test Set

Gemco™ Semelex® II Safetimeter Test Set

Stop Time Measurement Device for Press Stop Time and Safety Distance. 

OSHA Uses Safetimeter… Shouldn’t You?

The Semelex II Safetimeter Test Set is field proven to accurately measure press stop time and safety distance to verify compliance with federal and state requirements.

Designed for harsh industrial environments, the unit is portable, light weight, easy to use and incorporates new and improved features.

• Ruggedized Auto-Hand. Built for pressrooms, it will release a run button or push an E-Stop button to initiate press stop when signaled by the position/velocity transducer.
• Redesigned Auto-Flag.  Connects to the Auto-Hand and is positioned outside the sensing field of personnel safety devices. It initiates press stop by interrupting the sensing zone at a preset point in the stroke to check stop time.
• Heavy-Duty Position/Velocity Transducer. Industrial grade magnets for secure mounting
  to base and upper bolster. It provides accurate direction, position and velocity signals to the meter for testing press strokes up to 49".
• Quick-Charge Battery. The unit’s built-in battery can be fully recharged in eight hours, or can run off AC power. You cannot over-charge the battery, and a charge indicator signals you when the battery is low.
• Two Safetimeters in One. The same unit can be used to check full or part revolution clutch presses.

Applications Include: Indexing tables, fillers, conveyors and blow molding wheel machines.

A complete Series 1999 Semelex II Safetimeter Test Set includes: Meter, Position/Velocity Transducer with Cable Extension Set, Auto-Hand with Auto-Flag, Legs, Plunger Extension and Operations Manual. A 5-Year Limited Warranty is available.

1999 Semelex II Safetimeter Five Year Limited Warranty Plan Includes:
1. Limited Warranty. Seller warrants its products against defects in workmanship and material of the items purchased under this order provided, however, that notice of such defect is received in writing by Seller within five years from the date of delivery of the item under this order. Seller’s liability under this clause is restricted to replacing, repairing, or issuing credit (at Seller’s discretion) for any return unit and only
under the following conditions: (1) Seller must be properly notified in writing as soon as possible after the defects have been noted by the customer, but no later than five years from the date of delivery. (2) The defective merchandise is to be returned to place of manufacture, shipping charges prepaid by the customer. (3) Our inspection of the returned units shall disclose to our satisfaction that the units were defective in workmanship or material at the time of delivery. ALL OTHER WARRANTIES, FOR ANY OF
SELLER’S PRODUCTS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE ARE EXCLUDED.

2. Four Annual Re-Calibrations. Annual factory re-calibrations of the units are required to ensure accuracy of test results. Under the conditions stated in the above warranty, the Seller will provide four (4) annual re-calibrations of the unit, at no charge, during the life of the warranty. (Value:$1,400) Shipping of the unit to and from the manufacturer for re-calibration is the responsibility of the customer.

NOTE: This is a customized product and is not returnable. Please contact us if you have any questions regarding the suitability of this product to your application. There is a 4-6 Week Lead time after receipt of order.

1999 Semelex Safetimeter Brochure