Your shopping cart is empty! $0.00 $0.00
Using the same principle as our Ram Driven Mechanical Scrap Chopper, this pneumatically powered chopper is designed to shear scrap material from .004" (0.1mm) to .074" (1.8mm) thick mild steel. Provides controlled chopping while integral dampeners absorb snap through shock. The helically ground upper blade, made of high chrome tool steel, shears nearly any kind of material.
|Model||Max Stock Width in. (mm)||Stock Thickness Range in. (mm) CRS||Max Force at 80 PSI lbs (N)||Max Cycles/Minute with No Load||Air Consumption at Max SPM and 80 PSI (5.4 Bar)|
|ASC-6||6 (152)||.004-.074 (0.1-1.8)||2800 (12500)||200||6.8CFM (196L/min)|
|ASC-9||9 (228)||.004-.074 (0.1-1.8)||2800 (12500)||190||6.8CFM (196L/min)|
|ASC-12||12 (305)||.004-.074 (0.1-1.8)||2800 (12500)||180||6.8CFM (196L/min)|
Note: Guard Removed for Photo
Note: Solenoid Voltage is 120 VAC, Single Phase, 50/60 Hz. Other Voltages available - 240 VAC, 24 VDC.