• Stainless Steel Construction
• Computer Controlled
• Full or Strip Lubrication
• Lubricant Delivered Under Pressure
• Small Foot Print
The MiniCoater is a line of roller coaters designed to dispense lubricant onto coil stock before it goes into the press area. They are small but sturdy, made of stainless steel to last a lifetime. Manifolds dispense lubricant to the surface of the rolls where it is transferred in an even coating to the coil stock. The MiniCoater is a computer controlled roller coater that disperses the correct amount of lubricant on each cycle of the press. Manifolds can be shut off if a particular strip of the coil stock does not need lubrication, thus saving on lubricant cost. All of the features of the MiniCoater were designed for delivering the most controlled lubrication to the surface of coil stock while still giving the operator ease of operation and maintenance of the system. MC-151 Complete system, includes the MC-101 MiniCoater, the E-310 Electronic Counter including the Proximity Sensor and 24 V Solenoid, and One Gallon Reservoir with Filter and 20 PSI Pop-Off Valve. MC-151 accepts stock up to 1 inch in width. Includes two felt rolls and two dispensing manifolds, one for each roll.
MC-153 Complete system, includes the MC-103 MiniCoater, the E-310 Electronic Counter including the Proximity Sensor and 24 V Solenoid and One Gallon Reservoir with Filter and 20 PSI Pop-Off Valve. Accepts stock up to 3 inches in width. Includes felt rolls and two dispensing manifolds, one for each roll.
MC-156 Complete system, includes the MC-106 MiniCoater, the E-310 Electronic Counter including the Proximity Sensor and 24 V Solenoid and One Gallon Reservoir with Filter and 20 PSI Pop-Off Valve. Accepts stock up to 6 inches in width. Includes two felt rolls and 4 three inch dispensing manifolds, two for each roll.
MC-159 Complete system, includes the MC-109 MiniCoater, the E-310 Electronic Counter including the Proximity Sensor and 24 V Solenoid and One Gallon Reservoir with Filter and 20 PSI Pop-Off Valve. Accepts stock up to 9 inches in width. Includes two felt rolls and 6, three inch dispensing manifolds, three for each roll.