MeterMizer

Low Pressure Air Assist Lubricant Dispensing System or Airless Lubricating Dispensing System. The MeterMizer is a positive displacement pump that dispenses lubricant into a low pressure steam of air or can dispense a controlled drop of fluid, void of air, to the work area. The low pressure air carries the lubricant to the work area and delivers it as a Minimum Quantity Lubrication non-fogging spray. 

The dispensing of the lubricant can be controlled with a manual On/Off valve, solenoid valve, LSP Electronic Controllers and the LSP Air Timer. It can dispense in predetermined repeatable actuations, single shots or be tied into a machine and dispense on each cycle of the machine. 

• Reduces Fluid Consumption
• Near Dry Lubricating
• Non Fogging Spray
• Reduces Cost of Parts Cleanup
• Keeps the Work Area Clean
• Lubricant can be dispensed two ways:
with a low velocity air assist or delivered as an airless drop
• Cools and extends tool life

Available with one to six ejectors per system. They come either free standing or in an enclosed system. All free standing units come with a Magnetic Base. Each ejector comes with a nozzleOn a twelve in flexible tube mounted on a magnetic base.  

As shown in the inset image above, the MeterMizer can deliver a low pressure air assisted spray.

XL Systems use the MeterMizer-SA inserted in security enclosures.  Standard models are available with one, two or three ejectors.

Metermizer XL Systems are available with a solenoid valve (top row) or with an oscillating timer (bottom row). As shown, they can can be supplied with a reservoir or without.

SA systems are designed as stand alone systems.

Available with Oscillating Timers or Solenoid Valves and with Reservoir or without. Comes with Manifold, Ejectors, Manual On/Off Valve and Nozzle with Magnetic Base and 10’ Coaxial Tubing for each Ejector.

Applications requiring larger volumes of lubricant will be better served with a larger Reservoir. These resevoirs are usually remote form the MeterMizer and attached with five feet of plastic tubing. 

The MeterMizer-SC for single cycles is designed to deliver lubricant and air together in quick short actuations upon command. A single Solenoid Valve is used to dispense air from the Nozzle Tip and actuate the Ejector at the same time to dispense a predetermined amount of lubricant into the air stream As soon as the Solenoid Valve is shut off the air will stop the system is ready for its next cycle.

This system is perfect for stamping, assembly, chain lubrication and other applications.

The MeterMizer-BG is designed to handle additional Ejectors for the larger jobs where more nozzles are needed to complete the application. Large Reservoirs for the larger applications. Install REMOTE from the MeterMizer. Comes with 5 feet of tubing to connect between Reservoir and MeterMizer. Smaller Reservoirs, for the applications where Ejectors are not actuated as frequently, such as tapping or chain lubrication, attach DIRECTLY to the MeterMizer.

Includes: One Oscillating Timer or One Solenoid Valve, Manual On/Off Valve, One Nozzle, FlexTube, Magnetic Base and 10’ of Coaxial Tubing per Ejector. Reservoir and operating actuators are not included and must be ordered separately.

With Solenoid Valve Custom Assembled MeterMizers SA or BG assemblies mounted on special brackets. All plumbing and wiring in place and integrated for single line connections.   Specify:
MeterMizer Systems to be mounted on Brackets, Nozzle specifications, Manual On/Off Valves or Solenoid Valve for air in port, Permanent Screw type installation or Magnetic Base installation. Other accessories available upon request.

Download the MeterMizer Catalog.