The TP-10 transports pieces of scrap, or parts, with a shaking motion. A custom tray is fitted onto the body and the rhythmic, linear motion moves the tray slowly forward and then quickly backwards. The metal shavings, scrap, or finished parts are gently shuffled along the tray and into a convenient container. Air Consumption is so low that it is considered insignificant in a press shop environment. The noise level is well under acceptable standards for industrial uses.
Note 1: Recommended speed: 120 SPM
Note 2: Feed Rate; 26-34 FPM (8-10m/min.)
Note 3: Air Pressure Range: 60-75 PSI (4-6 bar)
Note 4: Max. incline of Tray 8 Degrees.
Design a Custom Tray configuration to suit your application. Visit www.thechuter.com for custom chuter system pricing.
|Max Tray Weight Lbs (Kg)||6 (2.7)|
|Load Capacity with Tray lbs. (Kg)||20 (10)|
|Stroke Length in. (mm)||0.98 (25)|
|Sound Level (db-A)||68|
|Air Consumption CFM (L/Min.)||0.7 (20)|