ROCKLINIZER equipment, using the ROCKLINIZING process, applies a hard and wear resistant surface of TUNGSTEN CARBIDE and ROCKHARD electrode material to metals, tools and dies.

The Rocklinizer electronically impregnates and deposits wear-resistant material both underneath and on top of metal surfaces. Unlike welding or metal spraying, no appreciable heat is generated; and the electrode material will not separate or flake off the workpiece. After Rocklinizing, no heat treatment, grinding or other surface treatment is necessary.

The end result of this surface treatment is to increase productivity and reduce costs. When the tools and dies remain in operation without replacement due to wear, there will be less machine downtime, operator idle time, and expense of new or resharpened tools and dies.

These savings justify the purchase of the Rocklinizer. Want to see a demo? 

Please contact us to learn more about this valuable tool, including pricing, delivery and support. 

Rocklinizer Short Video


Read what one Rocklinizer user has to say about the product. 

Rocklinizer Model 950
 

LONGER WEAR FOR METALS!

---

The Rocklinizer comes in five different models to meet your specific needs. 

Each Model Includes: Power Supply, Applicator, Electrode Package and Operating Instructions.
Note: "E" models are 220-240 volts.

MODEL 950

DESCRIPTION

Rocklinizer Model 950 / 950E - Deposits from .0001" to .010" and higher in a single application, controllable within .0001” by machine setting.   Approximately 30 lbs. (13.2 kg.) The Model 950 Rotary Applicator is automatically triggered when the electrode is placed in contact with the workpiece, or manually triggered by the operator. Faster Application Widest Deposit Range Rotary Applicator Integrated Air Pump Digital Readout Touch Panel Controls 100% Portable

MODEL 850	DESCRIPTION
	Rocklinizer Model 850 / 850E with ROTARY APPLICATOR - Deposits from .0002" to .007" in a single application, controllable by machine setting.   Approximately 30 lbs. (13.2 kg.) Model 850 Rotary Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator. Faster Application Rotary Applicator Digital Readout Touch Panel Controls Portable
MODEL 600	DESCRIPTION
	600 / 600E - Deposits from .0001" to .004" in a single application, controllable within .0001" by machine dial setting. Approximately 49 lbs. (22.3 kg.) Model 600 Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
MODEL 500	DESCRIPTION
	500 / 500E - Deposits from .0001" to .002" in a single application, controllable within .0001" by machine dial setting. Approximately 33 lbs. (14.5 kg.) Model 500 Applicator is automatically triggered when electrode is placed in contact with workpiece, or manually triggered by the operator.
MODEL 380	DESCRIPTION
	380 / 380E - Deposits from .0001" to .001" in a single application, controllable within .0001" by machine dial setting. Approximately 26 lbs. (11.8 kg.) Model 380 has variable discharge positions.
KNIFE MAKER'S MODEL	DESCRIPTION
	380AKM / 380AKME Knife Maker’s Model - Deposits are available from .0001” to .001” in a single application, controllable within .0001” by machine dial setting.   Approximately 28 lbs. (12.7 kg.) High Endurance Knife Edge System: Carbide Treated Wear Protected Edge. Self-Sharpens With Continued Use.  HEKE™ Patent Pending By George Lambert

ROCKHARD electrodes build up materials, reclaim undersized tools by restoring tolerances, provide gripping on collets and clamping blocks, and maintain dimensions on bearings, shafts, and other metal surfaces.

TUNGSTEN CARBIDE is applied to high speed steel and other metal surfaces to prolong useful life and reduce wear.

Typical Applications for Metal Stampers:

The ROCKLINIZER is often referred to as the "add on" machine. Key die details are often protected from premature wear by using The ROCKLINIZER. Each stroke of the press theoretically takes away a portion of the tooling. Now there is a way to combat this phenomena. Typical applications for metal stampers include:

• Control Slug Pulling - by applying stripes of tungsten carbide evenly inside the die cavity to provide resistance for the slug riding back up on the punch.
• Increased Die Life - apply to top surface of die for longer wear.
• Increased Punch Life - add tungsten carbide to the entire punch surface for longer wear.
• Improve Part Quality - by controlling the clearance between punch and die.
• Shimming Details - perfect for precise adjustment and alignment.
• Draw Beads - The Rockhard electrode deposits a deliberately rough finish to increase both the effectiveness and size of a draw bead.

Method: Apply to the area which is getting the wear.  This can be at positions A or B as shown or it can be at both positions.  Usually, for most types, the deposit is made on the sides (A) and then the face (B) is ground.  In this manner, worn areas can be built back to size without cutting away the entire worn portion of the punch or die.  Deposit can be from 0.0003 inches to 0.001 inches for wear resistance only, or 0.0001 inches to maximum for build-up.  Sometimes, deposit is made on face (B).  For best results, experiment with deposit location and amount.

How to Apply

The portable ROCKLINIZER allows wear prevention and maintenance to be easily performed in your plant - not just in the tool room.  Anywhere!

The ROCKLINIZER Beamed Thunderbolt Gun is automatically triggered when the electrode is placed in contact with the workpiece, or manually triggered by the operator. Deposits are available from .0001" to .004" in a single application, controllable within .0001" by machine dial setting.

The ROCKLINIZER electronically applies electrode material by a spark deposition process. Material is impregnated both underneath and on top of the workpiece surface. Because no appreciable heat is generated, the temper of the workpiece is retained. ROCKLINIZING is applied to new or reground and resharpened surfaces.

Typical applications include:

Common Uses Of The Rocklinizer Include:

• Punching, Stamping, Forging & Extruding: Stop slug pull back, reduce galling, extend time between sharpenings
   
• Solid Carbides & Inserts: Surface seal and prevent chipping
   
• Die Casting: Restore parting lines, prevent heat checking, soldering, seizing of cores, protect gates and runners
   
• Plastics & Composites: Improve fabrication operations including molding, machining, trimming and protecting abrasive wear areas
   
• Gripping & Screw Machining: (i.e. bending clamps, collets, pusher pads, feed fingers, chuck jaws) Provide a suitable textured finish and restore tolerances
   
• Glass Processing: Molds, cut off tooling, glass handling equipment
   
• Perishable Tools & Dies: Reduce wear on high speed steel and carbide tooling
   
• Wood Industry: Saws, cutters, planer blades, and chipper knives
   
• Maintenance: Restore tolerances on bearings, shafts, and other wear areas
   
• Paper Products: Die cutting knives and shear blades

 

The Rocklinizer requires some applications discussion to configure it correctly for your requirements.  Please contact Stampers Store by email or phone to learn more about this valuable tool, including pricing, delivery and support.

 

Rocklinizer Full Video



Rocklinizer Knife Maker's Model Video
 

Rockinizer On A Bending Die & Collet (15 seconds)

Rocklinizer On A Knife Edge (15 seconds)

 

  Rocklinizer Brochure