Quik-Learn Tonnage Monitor

Description

The Quik-Learn automatic tonnage monitor is important for die setup, SPC work, quality assurance and effective monitoring. Protecting investments, reducing downtime and improving productivity and product quality are all benefits of using the Quik-Learn.

 The Quik-Learn tonnage and deviation monitor is easy-to-use and inexpensive. All of the operator information and controls are on the front panel. There is no need to study manuals or undergo extensive training.

The Quik-Learn can display the forming stroke in three ways:

• Quik-Learn Run... automatic monitoring mode, press overload &working tonnage alarms active
• Set Up Press (peak tons)... displays peak tonnage reached during each press stroke, press overload alarms active
• Set Up Press (track tons)... displays "track" tonnage as the press goes through the forming stroke, press overload alarms active

Quick-Learn features include:

• Left, right, & total tonnage display
• Deviation from tonnage setup
• Displays tons or percent deviation
• High & low tonnage display
• Target Tonnage Indicator lights
• Capacity & working tonnage alarms
• Low alarms may be disabled
• Automatically sets benchmark tonnage
• View calibration numbers
• Percent of benchmark setpoints
• Percent of capacity setpoints
• Automatic Zero Balance
• Displays alarm setpoints
• Accepts two or four sensor inputs
• Analog output jacks
• Standard RS-485/232 serial port

Available Options:

• Autolearn
• Part counter or Reverse load
• Key reset
• Flushmount Kit
• Time based signatures
• Overload counts
• Pressroom networking

NOTE: This is a customized product and is not returnable. Please contact us if you have any questions regarding the suitability of this product to your application. Lead time is 4-6 Weeks after receipt of order.